So, Saturday morning I dug out my big box of CFLs, and got all nostalgic about them!
And as a result I’ve started to re-fit them again around the house! , I now have my original Philips 18 watt Genie that was on the landing before I tested the 20 watt CMH back in, the exact same lamp!
I’ve removed both the 10 watt Megaman LED in the bathroom for two 11 watt RING twin tube CFL, and as I’ve got boxes of 20 watt versions of Osram, Status and GE, I may reinstate those back into the kitchen lights!
It kind of cool to see the pre-heat starts and the tiny banding on the tubes again, and the after glow of them when they turn off!
CFL Nostalgia!
- AngryHorse
- Posts: 783
- Joined: Mon Aug 03, 2015 9:56 pm
- Location: Cheshire
CFL Nostalgia!
Welcome to OBLIVION
- Danny
- Site Admin
- Posts: 1809
- Joined: Sat Aug 01, 2015 9:12 pm
- Location: Durham
Re: CFL Nostalgia!
I do miss seeing CFLs about!
- FrontSideBus
- Posts: 1053
- Joined: Fri Aug 07, 2015 11:04 am
- Location: Liverpool
Re: CFL Nostalgia!
I still use them in table lamps ect.
My DIY 16 and 28w 2D adapters are still in their original lamps too.
My DIY 16 and 28w 2D adapters are still in their original lamps too.
- AngryHorse
- Posts: 783
- Joined: Mon Aug 03, 2015 9:56 pm
- Location: Cheshire
Re: CFL Nostalgia!
The Genie is actually a better colour than the Philips LED that was there originally!, and it’s 360 degree light instead of the LEDs downward facing only output, the landing looks better already!
Going from 10 watt LED in the bathroom to 11 watt CFL is only a slight drop in lumens, but I had to bathroom too bright anyway!
As for the 20s, I need to change the lamp holders in the kitchen back to BC before I can start using them, I’ve tried ES/BC adapter’s, but given the length of the 20s, they hang down too much in them and look naff.
Going from 10 watt LED in the bathroom to 11 watt CFL is only a slight drop in lumens, but I had to bathroom too bright anyway!
As for the 20s, I need to change the lamp holders in the kitchen back to BC before I can start using them, I’ve tried ES/BC adapter’s, but given the length of the 20s, they hang down too much in them and look naff.
Welcome to OBLIVION
- FrontSideBus
- Posts: 1053
- Joined: Fri Aug 07, 2015 11:04 am
- Location: Liverpool
Re: CFL Nostalgia!
That uneven light distribution is why I held off using retrofit LED lamps until LED filament lamps became available and even then only when coated ones started to appear.
In fact the frosted LED filament lamps are pretty much indistinguishable from a real incandescent imo. Just not quite there with the colour though.
In fact the frosted LED filament lamps are pretty much indistinguishable from a real incandescent imo. Just not quite there with the colour though.
- Oliver
- Posts: 1025
- Joined: Tue Nov 06, 2018 5:48 pm
- Location: County Durham
Re: CFL Nostalgia!
I always liked CFLs tbh, especially when they would get a load of blackening on them and still work lol. The older ones were especially interesting like the ones that had preheat start - they lasted AGES. I do miss seeing them around like I used to.
- AngryHorse
- Posts: 783
- Joined: Mon Aug 03, 2015 9:56 pm
- Location: Cheshire
Re: CFL Nostalgia!
It seems you can still get the Philips ones in 11 and 20 watt from Toolstation?
Welcome to OBLIVION
- Nick217
- Posts: 418
- Joined: Mon Nov 09, 2015 2:31 pm
Re: CFL Nostalgia!
There still about but you have to look a little harder
- Flurofan96
- Posts: 108
- Joined: Mon Aug 20, 2018 1:01 am
- Location: Reading
Re: CFL Nostalgia!
I've had a massive success with finding all of the superb CFLS from car boot sales, charity shops and even FB Marketplace sellers. I am no ways slowing down on collecting CFLS even the Philips Genies (I want more 18W quad turn tube ones) because CFLS were my childhood
- dor123
- Posts: 142
- Joined: Tue Apr 02, 2024 8:26 am
- Location: Kiryat Ata, Israel
Re: CFL Nostalgia!
Here in Israel, you can find only generic CFLs from: Nepton (Orout Haamakim), Sunlight (NISKO), Hyundai and Semicom (Semicom Lexis), and Flash (Flash Lighting).
You must, and I meant MUST, burn them base-down, in order to squeeze long life from them, as most of them burns their ballast at base-up.
You must, and I meant MUST, burn them base-down, in order to squeeze long life from them, as most of them burns their ballast at base-up.
I love see run-up and hot restrike of HID lamps, mainly on timed ignitors, and spectra of metal halide lamps.
Return to “Fluorescent Lighting”
Who is online
Users browsing this forum: No registered users