Was thinking the other day, of the most common fluorescent battens that you see out in the wild so to speak, which is your favourite?
I think I’ve listed the most common players except Tamlite, I’ve left that out on purpose lol, nobody will vote for that anyway
Best Batten?
- FrontSideBus
- Posts: 1053
- Joined: Fri Aug 07, 2015 11:04 am
- Location: Liverpool
- lasagafield
- Posts: 216
- Joined: Fri Jun 01, 2018 11:06 pm
- Location: Salford
Re: Best Batten?
Fitzgerald has to be the winner for me.
Simple fittings, often only in bog standard sizes but made like a lump of Victorian cast iron.
They rarely go wrong and if they do there isn't anything to fix necessarily.
I've never owned a knackered fitzy fitting.
Simple fittings, often only in bog standard sizes but made like a lump of Victorian cast iron.
They rarely go wrong and if they do there isn't anything to fix necessarily.
I've never owned a knackered fitzy fitting.
Gotta have me, a good... LASAGA!
- fluorescent
- Posts: 1069
- Joined: Tue Jan 24, 2017 1:23 am
- Location: UK
Re: Best Batten?
Specifically from that list I picked the Europa... That being said I like them as much as a Crompack 3 (the 3 being manufactured around the same era). The Thorn Popular Pack with the T12 or oval lamp holders isn't that far behind them IMO.
I would not pick the Fitzy Light Pack, they're OK, but they always seem to have poorer lamp holders than the competition and aren't particularly 'heavy duty' and they seem more rust prone.
I would not pick the Fitzy Light Pack, they're OK, but they always seem to have poorer lamp holders than the competition and aren't particularly 'heavy duty' and they seem more rust prone.
Country life, vintage lights and a gin & tonic
- lasagafield
- Posts: 216
- Joined: Fri Jun 01, 2018 11:06 pm
- Location: Salford
Re: Best Batten?
They're not rock hard but they last.
Seen plenty of bashed about, yellowed and rusted ones but not a knackered one.
Seen plenty of bashed about, yellowed and rusted ones but not a knackered one.
Gotta have me, a good... LASAGA!
- Slyspark
- Posts: 2999
- Joined: Mon Feb 22, 2016 11:00 pm
- Location: Surrey
- Contact:
Re: Best Batten?
In terms of both quality & design:
1) GEC Europa
2) Thorn pop-pack (70's / 80's versions)
3) Fitzy batten range
4) Philips / Crompton Streamlite (these might have been higher, if not for the fact the gear ALWAYS goes noisy!)
1) GEC Europa
2) Thorn pop-pack (70's / 80's versions)
3) Fitzy batten range
4) Philips / Crompton Streamlite (these might have been higher, if not for the fact the gear ALWAYS goes noisy!)
Bad choices make good stories!
- Kev
- Posts: 1015
- Joined: Sat Aug 01, 2015 10:08 pm
- Location: UK
Re: Best Batten?
This is tougher than choosing between UKIP and the brexit party for me. But I think for me the Europa has to top it just a well made fitting plenty of steel good spring loaded cover clips just well made I’d say better lamp holders than PPs as they tend to go crispy over time
- Ash
- Posts: 387
- Joined: Sat Dec 02, 2017 9:42 pm
Re: Best Batten?
Gaash lanterns of the 2nd half of the 80s and early 90s - The 1600 (strip with tombstone sockets), 4400/2000 (Europa), 4400 later version, and Speedpack (similar, but not identical to GEC)
Fitzgerald Lightpack of the early 90s
Fitzgerald Lightpack of the early 90s
- FrontSideBus
- Posts: 1053
- Joined: Fri Aug 07, 2015 11:04 am
- Location: Liverpool
Re: Best Batten?
Interesting, not much love for the old Pop Pack. Must admit an old PP240 is on my wish list.
- AngryHorse
- Posts: 783
- Joined: Mon Aug 03, 2015 9:56 pm
- Location: Cheshire
Re: Best Batten?
I have to go with the Europa, it was the one in our kitchen as a kid, that started the interest in lighting for me.
Welcome to OBLIVION
- BC5-80
- Posts: 316
- Joined: Fri Oct 02, 2015 8:33 pm
- Location: Stockport
Re: Best Batten?
Back in the 70s / 80s I always regarded Fitzgerald as a poor man's copy of Thorn pop pack (we're talking T12 era, before the oval spring-loaded lamp holders on Thorn). Whereas the Thorns always had PFC capacitors in 4' upwards, the Fitzgerald offerings were usually the cut-price LPF versions without capacitors more commonly available to non-trade DIY-ers, and I think the lamp holders were a bit more 'plasticy' is a cheap way.
Return to “Fluorescent Lighting”
Who is online
Users browsing this forum: No registered users