Oops!

Any sort of discussion to do with any lighting whether it be vintage to modern!
User avatar
FrontSideBus
Posts: 967
Joined: Fri Aug 07, 2015 11:04 am
Location: Liverpool

Oops!

Postby FrontSideBus » Tue Apr 07, 2020 5:03 pm

Something was taking out the RCD today and my first guess was something on the outside circuit was to blame.
Turns out it was the pond pump that had gone dead short to earth but it seems my meggering has killed the photocell on my Gamma 6!
User avatar
Ash
Posts: 344
Joined: Sat Dec 02, 2017 9:42 pm

Re: Oops!

Postby Ash » Wed Apr 15, 2020 9:14 pm

Do you short L+N when meggering ? If no, you could have charged up the capacitor in the "dropper" power supply of the cell (thorugh any minor leakage to E present in the circuit). In second thought, thats gotta be some 275 X2 capacitor so it shouldn't die from meggering anyway... The electronics should never see any significant voltage as the Zener clamps whatever is after the dropper
User avatar
Oliver
Posts: 986
Joined: Tue Nov 06, 2018 5:48 pm
Location: County Durham

Re: Oops!

Postby Oliver » Wed Apr 15, 2020 10:23 pm

Did it dayburn after that?
User avatar
FrontSideBus
Posts: 967
Joined: Fri Aug 07, 2015 11:04 am
Location: Liverpool

Re: Oops!

Postby FrontSideBus » Wed Apr 15, 2020 11:01 pm

Yeah there is a remote control module in circuit so I tested live an neutral shorted together in reference to earth.
Can’t understand why it would be affected by that unless it was just a coincidence that it died when it did lol!
Yeah it dayburns now.
User avatar
Oliver
Posts: 986
Joined: Tue Nov 06, 2018 5:48 pm
Location: County Durham

Re: Oops!

Postby Oliver » Thu Apr 16, 2020 12:03 am

Possibly weakness in the insulation / traces?
User avatar
Slyspark
Posts: 2898
Joined: Mon Feb 22, 2016 11:00 pm
Location: Surrey
Contact:

Re: Oops!

Postby Slyspark » Thu Apr 16, 2020 12:06 am

If you shorted Phase and Neutral together and tested to earth, shouldn't have nuked the cell!
Bad choices make good stories!
User avatar
Ash
Posts: 344
Joined: Sat Dec 02, 2017 9:42 pm

Re: Oops!

Postby Ash » Thu Apr 16, 2020 8:21 pm

What's the switching component in the RC and in the cell ? (triac or relay ?) And whats the power supply in each (cap dropper or switching) ?

Return to “General Lighting Discussion”

Who is online

Users browsing this forum: No registered users