Ansell LED panel

Put anything here that's badly designed/made, failed, catastrophically exploded or just an epic fail in a general sort of way.
User avatar
Slyspark
Posts: 2898
Joined: Mon Feb 22, 2016 11:00 pm
Location: Surrey
Contact:

Re: Ansell LED panel

Postby Slyspark » Sun Aug 30, 2020 4:14 pm

Depends if they've used metal fire cable retaining clips within it or not. If not then yes, totally illegal.
Bad choices make good stories!
User avatar
FrontSideBus
Posts: 967
Joined: Fri Aug 07, 2015 11:04 am
Location: Liverpool

Re: Ansell LED panel

Postby FrontSideBus » Sun Aug 30, 2020 4:34 pm

Anybody who has instergram should ask them if it fully complies with the current wiring regulations lol.
User avatar
Slyspark
Posts: 2898
Joined: Mon Feb 22, 2016 11:00 pm
Location: Surrey
Contact:

Re: Ansell LED panel

Postby Slyspark » Sun Aug 30, 2020 4:34 pm

Alas, not on there or I'd be telling them what I think of their 'upgrade'
Bad choices make good stories!
User avatar
Oliver
Posts: 986
Joined: Tue Nov 06, 2018 5:48 pm
Location: County Durham

Re: Ansell LED panel

Postby Oliver » Sun Aug 30, 2020 5:51 pm

User avatar
Oliver
Posts: 986
Joined: Tue Nov 06, 2018 5:48 pm
Location: County Durham

Re: Ansell LED panel

Postby Oliver » Sun Aug 30, 2020 6:25 pm

How can they make LED backlit monitors and TV's so reliable but LED lighting panels so rubbish when they are basically the same?
This monitor has failing LEDs. It's a Hanns G monitor. Seems quite rare though and overall LEDs in monitors are quite reliable. The old CCFL backlights were also very reliable however they do go a bit flickery after a years of use.
You do not have the required permissions to view the files attached to this post.
User avatar
Oliver
Posts: 986
Joined: Tue Nov 06, 2018 5:48 pm
Location: County Durham

Re: Ansell LED panel

Postby Oliver » Sun Aug 30, 2020 8:21 pm

Got a shock off a plug today. Unplugged a table lamp and caught the pins and got a little shock off it. Definitely not the worst shock I've ever had, just made me drop the plug.
User avatar
Slyspark
Posts: 2898
Joined: Mon Feb 22, 2016 11:00 pm
Location: Surrey
Contact:

Re: Ansell LED panel

Postby Slyspark » Sun Aug 30, 2020 10:02 pm

No sleeved pins on the plug then?
Bad choices make good stories!
User avatar
Oliver
Posts: 986
Joined: Tue Nov 06, 2018 5:48 pm
Location: County Durham

Re: Ansell LED panel

Postby Oliver » Sun Aug 30, 2020 10:18 pm

The plug is fine but there must be a capacitor inside keeping a charge as it shocked me when the pins touched me.
User avatar
Slyspark
Posts: 2898
Joined: Mon Feb 22, 2016 11:00 pm
Location: Surrey
Contact:

Re: Ansell LED panel

Postby Slyspark » Sun Aug 30, 2020 10:47 pm

Ah, I see!
Bad choices make good stories!

Return to “Hall of Shame”

Who is online

Users browsing this forum: No registered users