LED retrofit tube description

Put anything here that's badly designed/made, failed, catastrophically exploded or just an epic fail in a general sort of way.
Post Reply
User avatar
Oliver
Posts: 984
Joined: Tue Nov 06, 2018 5:48 pm
Location: County Durham

LED retrofit tube description

Postby Oliver » Sat Jan 02, 2021 9:22 pm

https://www.ebay.co.uk/itm/Lot-of-3-T5- ... 2518.l4276
Top
User avatar
Nick217
Posts: 400
Joined: Mon Nov 09, 2015 2:31 pm

Re: LED retrofit tube description

Postby Nick217 » Sat Jan 02, 2021 9:34 pm

True in some aspects on 12v fluorescent led tubes are actually better.
Top
User avatar
HIDLamp
Posts: 616
Joined: Sat Mar 19, 2016 9:37 pm

Re: LED retrofit tube description

Postby HIDLamp » Sat Jan 02, 2021 9:42 pm

I've never had good experiences with 12V fluorescent, always hammering the tube cold cathode, thus killing the tube prematurely.
I've now ripped out all 12V fluorescent and replaced with LED and never looked back
Top
User avatar
Ash
Posts: 344
Joined: Sat Dec 02, 2017 9:42 pm

Re: LED retrofit tube description

Postby Ash » Sat Jan 02, 2021 11:21 pm

Most common 12V inverters are just overhyped, overloaded, and cost-cut EM packs. Try running proper 230V FL on an inverter instead
Top
User avatar
Oliver
Posts: 984
Joined: Tue Nov 06, 2018 5:48 pm
Location: County Durham

Re: LED retrofit tube description

Postby Oliver » Sun Jan 03, 2021 12:07 am

I'd probably prefer to use proper LED fittings rather than trying to put these in probably brittle and yellowed 12v fluorescent fittings. I wonder how many people have tried these in mains 8w fittings as that could easily be done.
Top
User avatar
Nick217
Posts: 400
Joined: Mon Nov 09, 2015 2:31 pm

Re: LED retrofit tube description

Postby Nick217 » Sun Jan 03, 2021 10:38 am

I did run inverter fed 240v switch start 18w fluorescent.. in one of my vans. However my current van has 5 12v fluorescent fittings in it.
Top
Post Reply

Return to “Hall of Shame”

Who is online

Users browsing this forum: No registered users