NARVA HQKRG 80, 125, 250; NF 80-21, NF 125-21, NF 250-21

Anything to do with discharge lamps mercury, SON, SOX etc and their control gear! Do you just need information on how to run a lamp correctly? Post it here!
User avatar
Olav
Posts: 24
Joined: Wed Nov 10, 2021 2:28 pm
Location: Hamburg, Germany

NARVA HQKRG 80, 125, 250; NF 80-21, NF 125-21, NF 250-21

Postby Olav » Tue Jan 11, 2022 3:33 pm

At the end of the sixties in the German Democratic Republic (GDR) the development of a simple fixture in open design for the lamps mv 80W and mv 125W with base E27 was made by the company "VEB Leuchtenbau Leipzig".
The lamps for these fixtures were specially developed and produced by NARVA. This is followed by pictures of the lamps and some excerpts from books, catalogs, magazines in German language.
There was also a larger type of this lamp for 250W with an E40 socket. These lamps were designed exclusively for fixtures in industrial lighting.

Image
Source: VKM Katalog Zweckleuchten 1978



Image
Source: NARVA High-pressure mercury-vapour lamps NAVIFLUX, 1979



Image
Source: Der Elektro-Praktiker Heft 7 1969



Image
Source: Der Elektro-Praktiker Heft 7 1969



Image
Source: Der Elektro-Praktiker Heft 7 1969



Image
Source: NARVA Entladungslampenpraxis, Berlin 1971



Image
NARVA HQKRG 125 12, made in 2nd quarter 1971 in Berlin-Friedrichshain (GDR)


Up to the end of 1973 the designation of these lamps was NARVA HQKRG 80, HQKRG 125 and HQKRG 250, from 1974 the designation was NARVA NF 80-22, NF 125-22 and NF 250-22.

From 1975 there were three lamps under the designation NARVA NF 80-21, NF 125-21 and NF 250-21.


The change from the last digit "2" to "1" was made necessary by changing the phosphor.
2 = fluorine germanate
1 = yttrium vanadate

Image
NARVA NF 80-21 74, made in 4th quarter 1977 in Berlin-Friedrichshain (GDR)



Image
Engeneering sample NARVA HQKRG 80 42, made in 2nd quarter 1974 in Berlin-Friedrichshain (GDR) with socket B22 two pin



Image
NARVA NF 125-21 91, made in 1st quarter 1979 in Berlin-Friedrichshain (GDR)



Image
NARVA HQKRG 250 03, made in 3rd quarter 1970 in Berlin-Friedrichshain (GDR)



The 250W lamp also changed its shape from the BT shape to the ellipsoid shape in the early 1970s.


Image
NARVA NF 250-21 52, made in 2nd quarter 1975 in Berlin-Friedrichshain (GDR)



Two pictures from the NARVA NF 125-21 91 a few seconds after the ignition and 30 seconds after the ignition:

Image



Image



The fixtures were often equipped with the normal 80W and 125W mv lamps (with and without fluorescent material), because the "21" type lamps were not always available. It was a common practice.

Regards

Olav
Last edited by Olav on Tue Jan 11, 2022 4:15 pm, edited 1 time in total.
User avatar
FrontSideBus
Posts: 940
Joined: Fri Aug 07, 2015 11:04 am
Location: Liverpool

Re: NARVA HQKRG 80, 125, 250; NF 80-21, NF 125-21, NF 250-21

Postby FrontSideBus » Tue Jan 11, 2022 4:12 pm

Interesting. I don't think you can get more of a basic lantern than that!
User avatar
Andy
Posts: 359
Joined: Tue Aug 04, 2015 8:36 pm
Location: England

Re: NARVA HQKRG 80, 125, 250; NF 80-21, NF 125-21, NF 250-21

Postby Andy » Tue Jan 11, 2022 5:29 pm

Thanks for posting this article Olav.

I knew that the HQKRG was the first naming convention for this type of lamp but did not know that the NF -22 was only produced for just one year in 1974. The NF -22 lamps must be extremely rare these days!
It is impressive to see examples of each type of lamp and all three power ratings. ;cool

Return to “Discharge Lighting, Lamps & Control Gear”

Who is online

Users browsing this forum: No registered users