Home > All images > AngryHorse > Control gear
Return to the thumbnail page FILE 5/6 Return to start See previous file See next file Skip to end
SI 51 ignitor board Ok, the joints I re-soldered are circled in red, these are the ones that looked dry, one of the terminal pin joints was dry.

SI 51 ignitor board

Ok, the joints I re-soldered are circled in red, these are the ones that looked dry, one of the terminal pin joints was dry.

26B9106B-4233-4A73-8997-4F8F31A58277.jpeg 37C40BBA-9FD4-4CCF-8628-BB49320C4B39.jpeg 3D064B33-97A9-4B89-BC0C-08781032ADDA.jpeg SI_51_ignitor_board.jpg Tridonic_multi-tap_driver.jpg
File information
Filename:SI_51_ignitor_board.jpg
Album name:AngryHorse / Control gear
Filesize:3813 KiB
Date added:28 Feb, 2016
Dimensions:2735 x 2048 pixels
Displayed:26 times
URL:http://80.229.24.59:9232/gallery/displayimage.php?pid=3201
Favourites:Add to Favourites

Comment 1 to 13 of 13
Page: 1

Kev   [28 Feb, 2016 at 05:13 PM]
What I've found with them if they are on the blue capacitor sometimes it heats them up and blows them
AngryHorse   [28 Feb, 2016 at 06:11 PM]
This has the grey one in, on gear it makes the ballast windings buzz, but no sound comes from the ignitor itself?
Kev   [28 Feb, 2016 at 10:15 PM]
Sounds like it's working then....??? Try a new HPI?
AngryHorse   [28 Feb, 2016 at 11:14 PM]
Could be trying to short the ballast though?, got another superimposed lined up for the next one though!
lampy   [29 Feb, 2016 at 06:39 PM]
Philips sox ignitors in the black plastic container suffer with dry joints on the blue capacitor, mainly the 35 watt
Kev   [29 Feb, 2016 at 06:54 PM]
Completely repairable! Wonder how many perfectly decent lanterns have been scrapped because of this I know probably millions of HF ballasts have been because of it!
AngryHorse   [29 Feb, 2016 at 08:32 PM]
Easier to bit it out for superimposed! Rolling Eyes
Danny   [29 Feb, 2016 at 08:59 PM]
Dads pulled a load of these out from Durham library I'm going to get him to bring them home
AngryHorse   [29 Feb, 2016 at 09:25 PM]
These are a bit of an oddball, you wouldn`t expect dry solder joints on something Philips makes?
Danny   [29 Feb, 2016 at 09:38 PM]
Yeah. It's not good I've come across this myself with the ignitors in the mi36 lanterns
FrontSideBus   [01 Mar, 2016 at 12:23 AM]
It's the fucking lead free solder. It's fucking shit!
Kev   [01 Mar, 2016 at 12:37 AM]
With these you NEED to use the correct lamp. Get your dad to check he's using Philips HPI
Danny   [01 Mar, 2016 at 12:58 AM]
I'm not sure what they're using but by the cdmt lamp he bought me home today it's German Osram power balls

Comment 1 to 13 of 13
Page: 1

Add your comment
Anonymous comments are not allowed here. Log in to post your comment