atlas TR/2305 200va Auto Transformer

For boosting a 110v supply to 230v. Currently fitted in an Atlas Atlantic 1 8ft single

atlas TR/2305 200va Auto Transformer


For boosting a 110v supply to 230v. Currently fitted in an Atlas Atlantic 1 8ft single

20181003_112107-1.jpg 20181015_180236-1.jpg 20181015_180253-1.jpg 20181112_192649-1.jpg 20190108_140644-1.jpg
File information
Filename:20181015_180253-1.jpg
Album name:fluorescent / Control Gear
Manufacturer:atlas
Type/Model:TR/2305
Filesize:2667 KiB
Date added:16 Oct, 2018
Dimensions:2945 x 1698 pixels
Displayed:52 times
URL:http://80.229.24.59:9232/gallery/displayimage.php?pid=9255
Favourites:Add to Favourites

Comment 1 to 12 of 12
Page: 1

BC5-80   [16 Oct, 2018 at 01:39 PM]
Doesn't that mean you'll be overloading it as it's only meant for 80W max? Also if the 8-footer operates at leading power factor, the overload would be even worse?
fluorescent   [16 Oct, 2018 at 04:29 PM]
I thought that at first, but it actually says 2 - 5ft. 80w (2x80w), not particularly clear! '200va' is the important bit anyway, 125w with a 0.8 power factor (which will be somewhere around what this circuit is) is about 156va, well within the capabilities of this unit
lasagafield   [17 Oct, 2018 at 09:54 AM]
What situation would this ballast be intended for? Was it made for overseas sales or for a working site etc?
fluorescent   [18 Oct, 2018 at 12:30 AM]
This is just a voltage transformer, the ballast in this fitting is separate. This came from a fitting rescued from an industrial site. I guess there was only 110v supplied in the building for whatever reason (probably safety)
Funkybulb   [18 Oct, 2018 at 12:31 AM]
you need at least 300 VA as it max out my radio shack 300 VA 230 volt to 120 volt travel transformer to run my 8 foot pop pack. but using transformer other way around.
Slyspark   [18 Oct, 2018 at 12:36 AM]
If you remember Adam, all the fittings at Geevor had one of these strapped to the back (all be it Crompton branded), as the mill and other buildings were on a 110v supply.
fluorescent   [18 Oct, 2018 at 12:40 AM]
@Funkybulb, as above this transformer is actually a bit overkill as the fitting it's in the requires approximately 156va. You may need to change/fit a PFC capacitor to lower the va required to run your fitting.

@Slyspark oh aye I'd forgotten about that. I wonder why these industrial sites didn't provide 240v for the lighting?
Funkybulb   [18 Oct, 2018 at 12:45 AM]
was the fitting 85 watts 8 foots? it prolly only way i can see this to work.
fluorescent   [18 Oct, 2018 at 01:08 AM]
It's 125w
Funkybulb   [18 Oct, 2018 at 02:39 AM]
well one thing I was orginallly drawing 1.2A using orginal capicitor 7.2 uF. it was due being run on 60 Hz here in USA. cause leading current to rise this cause transfomer to max out pulling 3.1 amps on 120 volts. Im like something bit wrong here. i change capicitor 6 uF brought current down to 972 mA. from that point i decided use my american philips T12 tubes. i change cap value again to 5 uF got it down to 792 mA to run 800 mA tube. been runing that ever since.
FrontSideBus   [18 Oct, 2018 at 08:56 AM]
You know it’s old when it states cycles per second instead of hertz...
lasagafield   [18 Oct, 2018 at 05:19 PM]
Ah, sorry. Half asleep when I saw that. Useful having one of them lying around.

Comment 1 to 12 of 12
Page: 1

Add your comment
Anonymous comments are not allowed here. Log in to post your comment