Home > All images > fluorescent > Fittings
Return to the thumbnail page FILE 10/151 Return to start See previous file See next file Skip to end
Hammered Thorn PP258 Airflow Markings I love seeing these airflow markings in fixtures indicating the amount of use/abuse they've had! This is one of the best examples I've seen, these markings will not come off easily, this picture is AFTER I'd washed the fixture! It's an oval lamp holder THORN PP258 from around 1990 (06/90 on the capacitor) and was clearly very well used. Whilst they did still work, I removed and skipped the SB ballasts as they'd turned golden brown and the terminals crumbled when I tried to remove the cables. Replacement ballasts have now been fitted ready for the fixture to put in 25+ more years service (hopefully!).

Hammered Thorn PP258 Airflow Markings


I love seeing these airflow markings in fixtures indicating the amount of use/abuse they've had! This is one of the best examples I've seen, these markings will not come off easily, this picture is AFTER I'd washed the fixture!

It's an oval lamp holder THORN PP258 from around 1990 (06/90 on the capacitor) and was clearly very well used. Whilst they did still work, I removed and skipped the SB ballasts as they'd turned golden brown and the terminals crumbled when I tried to remove the cables. Replacement ballasts have now been fitted ready for the fixture to put in 25+ more years service (hopefully!).

20180202_124227_HDR.jpg 20180207_162109.jpg 20180220_195854.jpg 20180223_120201-1.jpg 20180227_165513.jpg
File information
Filename:20180220_195854.jpg
Album name:fluorescent / Fittings
Filesize:1550 KiB
Date added:27 Feb, 2018
Dimensions:2048 x 1133 pixels
Displayed:53 times
URL:http://80.229.24.59:9232/gallery/displayimage.php?pid=7648
Favourites:Add to Favourites

Comment 1 to 5 of 5
Page: 1

Danny   [27 Feb, 2018 at 11:14 PM]
I’m trying to think of what fitting it is I have that’s equally as black as this inside Shocked
Slyspark   [27 Feb, 2018 at 11:27 PM]
Yes, you can always tell the ones that have done some serious hours!
Kev   [28 Feb, 2018 at 07:55 AM]
Shame these ballasts go crispy if left alone they are normally ok
fluorescent   [28 Feb, 2018 at 01:32 PM]
In hindsight I should have cut the cables elsewhere & rejoined them using connectors or solder. Still, I don't think they would have lasted much longer & the spares I fitted are in much better condition!
Ash   [28 Feb, 2018 at 03:43 PM]
Push in connectors like Helacon (Hellerman Tyton) / Wago are perfect for here

Comment 1 to 5 of 5
Page: 1

Add your comment
Anonymous comments are not allowed here. Log in to post your comment