Home > All images > fluorescent > Fittings
Return to the thumbnail page FILE 62/151 Return to start See previous file See next file Skip to end
Both my Courtney Pope 8ft twin fixtures working! Finally got both of these working. The right one with a pair of Philips 80w T5 HF ballasts to run 85w tubes, and the left is now 125w SRS courtesy of a pair of BNOS Parmar ballasts I got from eBay. Still a few issues to sort; on the HF one, one of the Rock lamp holders isn't making good contact and has burnt up a little and the 80w T5 HF ballasts seem to over-drive the 85w tubes somewhat too. Putting them on the power meter reveals about 100w being drawn from the supply for each tube. With a T5 tube fitted, about 83 watts is drawn at full brightness. For the 125w SRS one I need a pair of 7.8uF capacitors, I've fitted some 8uF for now but the tubes are being over-driven a bit.

Both my Courtney Pope 8ft twin fixtures working!


Finally got both of these working. The right one with a pair of Philips 80w T5 HF ballasts to run 85w tubes, and the left is now 125w SRS courtesy of a pair of BNOS Parmar ballasts I got from eBay.

Still a few issues to sort; on the HF one, one of the Rock lamp holders isn't making good contact and has burnt up a little and the 80w T5 HF ballasts seem to over-drive the 85w tubes somewhat too. Putting them on the power meter reveals about 100w being drawn from the supply for each tube. With a T5 tube fitted, about 83 watts is drawn at full brightness. For the 125w SRS one I need a pair of 7.8uF capacitors, I've fitted some 8uF for now but the tubes are being over-driven a bit.

IMG_1224.JPG IMG_1335.JPG IMG_1356.JPG IMG_20171030_111559.jpg IMG_20181229_071303.jpg
File information
Filename:IMG_1356.JPG
Album name:fluorescent / Fittings
Filesize:3032 KiB
Date added:23 Apr, 2018
Dimensions:3072 x 2048 pixels
Displayed:58 times
URL:http://80.229.24.59:9232/gallery/displayimage.php?pid=8044
Favourites:Add to Favourites

Comment 1 to 5 of 5
Page: 1

Andy   [23 Apr, 2018 at 08:24 PM]
Very nice! Interesting that the HF ballasts draw about 100w running the 85w T12 tubes.
Kev   [23 Apr, 2018 at 08:44 PM]
Lol that’s going to pop those HF ballasts even quicker id give the magnetic ones another try!
Danny   [23 Apr, 2018 at 08:47 PM]
The hf we used at the last meet to run 85s seemed to under run them I thought
fluorescent   [23 Apr, 2018 at 11:40 PM]
99% sure my power meter is correct, it's usually pretty accurate. The tubes do look very bright & the ballast buzzes a little. Not sure what I'm going to do with it yet, might try a different type of HF ballast, or I might just switch start the fucker and use 100/125w tubes!
Simon_R   [24 Apr, 2018 at 11:58 AM]
Always good to see 8 footers saved Smile

Comment 1 to 5 of 5
Page: 1

Add your comment
Anonymous comments are not allowed here. Log in to post your comment