Home > All images > FrontSideBus > HID: Metal Halide
Return to the thumbnail page FILE 112/151 Return to start See previous file See next file Skip to end
El-cheapo Chinky-Chonky H3 HID kit. Tried to get a picture of this tiny little lamp at full power but the small size makes it hard. Pea sized arc tube! This is obviously being driven on DC instead of AC! When I can be bothered I'll probe this with the scope and see what's going on! These do indeed have a xenon gas filling as they start up at quite a high initial brightness but the colour rendering is very poor for about 5-10 seconds until the halide dose vapourises and joins the discharge mix. The halide salts can be seen on the arc tube wall and at one end of the discharge column!

El-cheapo Chinky-Chonky H3 HID kit.

Tried to get a picture of this tiny little lamp at full power but the small size makes it hard. Pea sized arc tube!
This is obviously being driven on DC instead of AC!
When I can be bothered I'll probe this with the scope and see what's going on!

These do indeed have a xenon gas filling as they start up at quite a high initial brightness but the colour rendering is very poor for about 5-10 seconds until the halide dose vapourises and joins the discharge mix. The halide salts can be seen on the arc tube wall and at one end of the discharge column!

DPP00003040.JPG DPP00003041.JPG DPP00003042.JPG DPP00003053.JPG DPP00003063.JPG
File information
Filename:DPP00003042.JPG
Album name:FrontSideBus / HID: Metal Halide
Filesize:833 KiB
Date added:09 Jan, 2016
Dimensions:1920 x 1280 pixels
Displayed:25 times
URL:http://80.229.24.59:9232/gallery/displayimage.php?pid=2748
Favourites:Add to Favourites

Comment 1 to 5 of 5
Page: 1

AngryHorse   [09 Jan, 2016 at 10:28 PM]
Theres also not a full halo around the arc body, is there a noticeable uneven colour to it?, or is it too small to tell?
FrontSideBus   [10 Jan, 2016 at 12:14 AM]
It's not really noticeable, at least in the beam of the headlight. It's a projector unit so gets focussed through a lens anyway. The uneven arcstream might have something to do with it being a DC arc!
dor123   [19 Apr, 2024 at 02:55 AM]
The xenon is at high pressure. Here it is lights strong at turning on the lamp. And you can't start it with a regular HID 4-5KV ignitor.
Automotive MH lamps are working at AC in their headlights. If this arc here is really DC, this may not be good to the electrodes.
FrontSideBus   [21 Apr, 2024 at 09:50 AM]
It was running DC. I had the scope on it. They were shit anyway. Both lamps I had suffered cracked arc tubes.
dor123   [26 Apr, 2024 at 02:14 PM]
Regarding to lamp stability during run-up: Have you used an automotive HID ballast, which have a boosted current, or other stuff?
And which halides this lamp have?

Comment 1 to 5 of 5
Page: 1

Add your comment
Anonymous comments are not allowed here. Log in to post your comment