Home > All images > dor123 > Lamps
Return to the thumbnail page FILE 64/71 Return to start See previous file See next file Skip to end
My Philips ML 160W through ND1000 filter The filament and the arctube can be seen clearly. I would still recommends to run this lamp base-up, since the filament is below the arctube and not around it.

My Philips ML 160W through ND1000 filter

The filament and the arctube can be seen clearly.
I would still recommends to run this lamp base-up, since the filament is below the arctube and not around it.

IMG_9251.JPG IMG_9282.JPG IMG_9295.JPG IMG_9298.JPG IMG_9356.JPG
File information
Filename:IMG_9295.JPG
Album name:dor123 / Lamps
Manufacturer:Philips, China
Type/Model:ML 160W mercury blended lamp
Wattage:160W
Date manufactured:5.5.2005
Filesize:935 KiB
Date added:06 Dec, 2024
Dimensions:1536 x 2048 pixels
Displayed:11 times
URL:http://80.229.24.59:9232/gallery/displayimage.php?pid=22173
Favourites:Add to Favourites

Comment 1 to 6 of 6
Page: 1

AngryHorse   [06 Dec, 2024 at 07:51 AM]
Does this one extinguish when its tilted to the side like mine does?
dor123   [06 Dec, 2024 at 08:27 AM]
Yes. When burned horizontally, its extinguish: link . But not always. Sometimes it only rectifies.
AngryHorse   [06 Dec, 2024 at 02:46 PM]
There’s no explanation anywhere that I can remember to explain this phenomenon?
dor123   [06 Dec, 2024 at 02:48 PM]
FrontSideBus   [06 Dec, 2024 at 11:24 PM]
Voltage change which normally doesn't affect a magnetic choke lamp because of the voltage spike created on every zero volt crossing of the waveform?
dor123   [07 Dec, 2024 at 12:42 PM]
The problem is caused by hydrogen impurities that increases the ignition voltage and restriking voltage after every mains half-cycle, causing the arc to become unstable in non vertical position.

Comment 1 to 6 of 6
Page: 1

Add your comment
Anonymous comments are not allowed here. Log in to post your comment