Aqua-Signal 1044 internals

1 x Aqua-Signal 1044 24v DC marine fluorescent luminaire for 2 x 20w lamps.

Showing the gear & lamp tray removed. It has a very secure method of securing it to the body of the luminaire!
Pre-wired for loop in/ loop out in very thick 105'c rated cable. Note the solid brass compression glands.
Also note that there are starter and lampholder holes for up to 3 lamps.
The pen marks on the cable and blocks was me when I stripped it down for a good clean. The outside was filthy!

These are incredibly robust IP67 fittings and can be found on ships all over the world.
They are available in a variety of control gear such as 240 and 110v AC in switch-start and HF. They are also, like this one, available in 24vDC.
The luminaire body is available in either 316 stainless or zinc plated steel.

eBay win for Â£11!!! I bet they are quite a bit more than that when new!

MFD September 1994

File information
Filename:	aquasignal1.JPG
Album name:	FrontSideBus / Lanterns & Fittings
Filesize:	3032 KiB
Date added:	05 Oct, 2019
Dimensions:	3070 x 2048 pixels
Displayed:	26 times
URL:	http://80.229.24.59:9232/gallery/displayimage.php?pid=12700
Favourites:	Add to Favourites

Comment 1 to 4 of 4

Page: 1

oliver

[05 Oct, 2019 at 10:34 PM]

Very robust looking and most of it is metal. Why is it earthed when it's only for 24v?

FrontSideBus

[05 Oct, 2019 at 10:39 PM]

The fitting is also available in mains voltage AC so maybe the bodies are all made up the same with the only difference being the stickers and control gear. Or maybe the regulations for maritime use are differernt and require it regardless.

Kev

[06 Oct, 2019 at 09:26 AM]

Is there anymore on eBay??

FrontSideBus

[07 Oct, 2019 at 11:28 AM]

Not at the moment I think but you never know with eBay. My original plan was to whack a couple of chokes and starters in this and make it mains voltage but Iâ€™m not sure now...

Comment 1 to 4 of 4

Page: 1