Home > All images > FrontSideBus > Solid State
Return to the thumbnail page FILE 2561/8325 Return to start See previous file See next file Skip to end
Philips 18w Trueforce CorePro LED HPL: Full power 2 It's quite bright! Even after being ran sealed inside a Thorn Piazza bulkhead for a few hours the lamp become quite hot but I could still hold my hand on it quite comfortably. Certainly looks very realistic but you can tell it is not an MBF lamp, the light has a much better CRI. It also doesn't have that slight pinkish tint of a brand new MBF lamp nor does it have that greenish tint of a well used one either. Just glancing though, you'd not even notice that this wasn't HID. I quite like these indeed! One thing to note however, this is marketed as an 80w MBF replacement but it uses the larger outer envelope of a 125w MBF so it might not fit in all lanterns or fittings. I was going to try this in a classic Thorn SONPAK but it was slightly too large.

Philips 18w Trueforce CorePro LED HPL: Full power 2

It's quite bright!
Even after being ran sealed inside a Thorn Piazza bulkhead for a few hours the lamp become quite hot but I could still hold my hand on it quite comfortably.

Certainly looks very realistic but you can tell it is not an MBF lamp, the light has a much better CRI.
It also doesn't have that slight pinkish tint of a brand new MBF lamp nor does it have that greenish tint of a well used one either.
Just glancing though, you'd not even notice that this wasn't HID. I quite like these indeed!
One thing to note however, this is marketed as an 80w MBF replacement but it uses the larger outer envelope of a 125w MBF so it might not fit in all lanterns or fittings. I was going to try this in a classic Thorn SONPAK but it was slightly too large.

387A1140.JPG DSCF2447.jpg 387A1116.JPG 387A1113.JPG P1160407.jpg
File information
Filename:387A1116.JPG
Album name:FrontSideBus / Solid State
Filesize:2245 KiB
Date added:21 Nov, 2021
Dimensions:3070 x 2048 pixels
Displayed:38 times
URL:http://80.229.24.59:9232/gallery/displayimage.php?pid=16993
Favourites:Add to Favourites

Comment 1 to 8 of 8
Page: 1

Mrstreetlight   [21 Nov, 2021 at 11:27 PM]
I would love to put one of these into use or relight a path with them! Interesting only 18w, does it seem as bright as MBFU / a CDO?
FrontSideBus   [22 Nov, 2021 at 01:02 AM]
I'll have to dig out an 80w choke and do a comparison.
Mrstreetlight   [22 Nov, 2021 at 08:31 PM]
Look forward to seeing!
lampy   [22 Nov, 2021 at 10:51 PM]
will this work on 70w son gear also?
lampy   [22 Nov, 2021 at 10:52 PM]
or is it 240 direct to the lampholder?
FrontSideBus   [23 Nov, 2021 at 12:30 AM]
This was on 240 direct to the lamp holder which is the recommended installation method but the instruction leaflet states that an MBF or SON choke can be left in circuit as long as any ignitors and capacitors are removed.
Ash   [23 Nov, 2021 at 06:34 PM]
The lamp won't care about capacitors either, Removing them is just so they dont take the power factor low to the capacitive side
AngryHorse   [12 Mar, 2024 at 10:37 AM]
Looks good, but needs to be bluer Smile so it actually looks like mercury

Comment 1 to 8 of 8
Page: 1

Add your comment
Anonymous comments are not allowed here. Log in to post your comment