Home > All images > fluorescent > Fittings
Return to the thumbnail page FILE 190/619 Return to start See previous file See next file Skip to end
Fern-Howard Moonlight 16w 2D Bulkhead - Inside Bits Picked this up at a car boot sale at the weekend, a Fern Howard Moonlight FH790 16w 2D Bulkhead. This is a bit of a weird thing TBH, it has a full plastic constrction and had no reflector so the light output isn't quite as good as it could be. Also has no capacitor. It does have a built in miniature photocell, but that's dead sadly & I had to bypass it. It has a good quality May & Christe ballast which has seen a stuck starter for quite a long time by the look of it. The lamp fitted is a GB GE 835 that looks unused.

Fern-Howard Moonlight 16w 2D Bulkhead - Inside Bits


Picked this up at a car boot sale at the weekend, a Fern Howard Moonlight FH790 16w 2D Bulkhead.

This is a bit of a weird thing TBH, it has a full plastic constrction and had no reflector so the light output isn't quite as good as it could be. Also has no capacitor. It does have a built in miniature photocell, but that's dead sadly & I had to bypass it.

It has a good quality May & Christe ballast which has seen a stuck starter for quite a long time by the look of it. The lamp fitted is a GB GE 835 that looks unused.
GE_GB_30w-29.jpg IMG_20190225_174919.jpg IMG_20190225_182704.jpg IMG_20190225_182459.jpg 20190223_115908.jpg
File information
Filename:IMG_20190225_182704.jpg
Album name:fluorescent / Fittings
Manufacturer:Fern-Howard
Type/Model:Moonlight FH790
Wattage:16w
Filesize:2466 KiB
Date added:25 Feb, 2019
Dimensions:2883 x 1629 pixels
Displayed:40 times
URL:http://80.229.24.59:9232/gallery/displayimage.php?pid=10445
Favourites:Add to Favourites

Comment 1 to 8 of 8
Page: 1

oliver   [25 Feb, 2019 at 08:51 PM]
Nice simple 2D fitting. Interesting how it says use ONLY GE branded 2D's.
Danny   [25 Feb, 2019 at 09:15 PM]
Whats the photcell you got a pic of it. Some of these came with special infra red photocells that do not detect artificial light
fluorescent   [25 Feb, 2019 at 09:19 PM]
Not sure Danny & no pic at the minute, I'll get one later. The photocell's switch remained open whether the cell was covered or not
Slyspark   [25 Feb, 2019 at 09:32 PM]
Once had a Hilclare Lighting made 16w 2-D bulkhead similar to this, as in, no gear tray or reflector. Sadly, as it was white, the UV destroyed the plastic mount the lampholder clipped into and it fell apart. Pity this hasn't got a reflector, you'd lose far less light into the black background if it did!
fluorescent   [25 Feb, 2019 at 09:41 PM]
If I put this to use, I'll probably retrofit a reflector of some sort. I'm wondering if the reflectrors from one of them Tamlite bulkheads may be able to be modified/cut down to fit seeing as they're in the spares bin now
Slyspark   [25 Feb, 2019 at 09:49 PM]
You could do that, or to be honest, just a foil pie dish will be fine. Loads of fittings from the 70's / 80's only had something like that in them anyway!
Dave   [25 Feb, 2019 at 09:54 PM]
I have a NOS one of these, and like you pointed out, light output really isn't where it should be cause of that missing reflector. Like Rich has said, a pie tin reflector would do the trick perfectly here. I'm gonna be fitting mine with one to try and increase output. The larger Minstrel is the same also, so looks a lot dimmer than it should be.
fluorescent   [25 Feb, 2019 at 10:01 PM]
lol yes I've seen pie dish fittings before. I guess it works though, so will probably do just that. I've just found the pic of your Minstrel on LG Dave, a nice bulkhead that be!

Comment 1 to 8 of 8
Page: 1

Add your comment
Anonymous comments are not allowed here. Log in to post your comment